Invacare RBL250 Assembly, Installation And Operating Instructions page 5

Positioning the Bath Lift Frame in the
Bathtub (FIGURE 19)
1. Position the frame to align the line on the entry/exit
side flap with the inside edge of the bathtub as
shown in the FRONT VIEW of FIGURE 19.
WARNING
The frame must be positioned so that the
side flap of the seat on the entry/exit side
of the bathtub is fully supported by the
side of the bathtub. The inside edge of
the bathtub MUST be aligned with the line
on this side flap.
Suction Cup
NOTE: Suction Cups and
Ruber Pads must be flat on
bottom of bathtub
FIGURE 19 - POSITIONING THE BATH LIFT IN THE BATHTUB
Suction Cup Loop
PRESS DOWN ON
SUCTION CUP
Side Flaps
Seat
Frame
Bathtub
2. Ensure the pads and suction cups are positioned
flat on the bottom of the bathtub.
NOTE: Pull up on suction cup loops to release suc-
tion cups from bathtub bottom.
3. Press firmly down onto the two (2) front suction cups
to attach the frame securely to the bottom of the bath.
Position of Line on Side Flap
Side Flap Hinge
Seat
Inside Edge
of Bathtub
PROPER POSITIONING OF
ENTRY/EXIT SIDE FLAP
5
Entry/Exit
Side Flap