Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.8, No. 16)
Infrared Module Header
(5-pin IR1)
(see p.8, No. 21)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.8, No. 20)
(AUX1: see p.8, No. 24)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.8, No. 23)
System Panel Header
(9-pin PANEL1)
(see p.8, No. 13)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.8, No. 12)
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
USB_PWR
ASRock I/O Plus
P-7
P+7
6 ready-to-use USB 2.0 ports on
GND
DUMMY
the rear panel. If the rear USB
1
ports are not sufficient, this
GND
P+6
USB 2.0 header is available to
P-6
USB_PWR
support 2 extra USB 2.0 ports.
This header supports an optional
IRTX
+5V
DUMMY
wireless transmitting and
receiving infrared module.
1
GND
IRRX
These connectors allow you
AUX-R
CD-R
GND
GND
to receive stereo audio input
GND
GND
AUX-L
CD-L
from sound sources such as
CD1
AUX1
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
GND
This is an interface for the front
+5VA
BACKOUT-R
panel audio cable that allows
BACKOUT-L
convenient connection and
1
control of audio devices.
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
PLED+
This header accommodates
PLED-
PWRBTN#
several system front panel
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
SPEAKER
speaker to this header.
DUMMY
DUMMY
+5V
1 9
1 9
1 9
1 9
1 9
TM
provides you
Advertisement
Table of Contents
