Maintenance; Travis Industries; Maintaining Your Fireplace's Appearance; Battery Replacement - Travis Industries 864 TRV GS Operation And Maintenance Manual

Maintaining Your Fireplace's Appearance

Fingerprints or other marks left on the optional plated surface may become etched in place if they are not
wiped clean prior to turning the fireplace on. Clean the plated surface with denatured alcohol and a soft
cloth (with the fireplace cool). Other cleaners may leave a film that may become etched into the surface.

Battery Replacement

Power Backup Batteries
Four AA batteries are used as a power backup for the fireplace in case the household (AC) power goes out. They
also power the comfort control feature. These batteries must be inserted into battery holder (make sure they contact
the terminals - see the illustration below). The fireplace controller will beep once these batteries start to go dead.
Replace batteries before each heating season to insure proper operation.
Control Panel Light Battery
LED lights and a 9v battery are used to illuminate the control panel when the concealment cover is lifted. If the LED
lights do not operate, replace the 9v battery (see the illustration below). The battery holder is held in place with Velcro
and may be removed for easier access.
Lift up and swing the lower grill
down to acces the area below the
firebox.
© Travis Industries

Maintenance

Swing the concealment cover
up and slide it back to expose
the controls.
4090227
Battery Holder for Control
Panel Lights
AA Battery Tray
100-01227_000
11
AA Battery
Holder