Table of Contents
Advertisement
Driver Installation
3-8. Before Running Graphic Max
We have provided you with a tool for adjusting both the graphic processors working speed and the
graphic memory speed. Please be reminded that it may cause damage to both the graphic processor and
graphic memory if you use incorrect settings. Please read the following description carefully before
running ABIT Graphic Max!
1. ABIT does not provide any warranty or support for this utility. The usage of this utility is at your own
risk. This risk includes all damages caused by this utility. If you don't accept this warning, don't use
this utility.
2. ABIT does not recommend any overclocking settings for your hardware. Overclocking can cause
overheating which will damage your chip.
3. If you are not acquainted with the display card hardware, we strongly recommend that you not to use
this utility. Improper settings can cause unrecoverable damages to your graphics chip, your display
card, and other components!
1. This utility is provided for fine-tuning your display card to allow for maximum stability on your
system. It is for Windows
2. Select "Start ! Programs ! ABIT Graphic Max ! Graphic Max" to launch Graphic Max.
3. If you have adjusted the Graphic Max settings and have problems after booting, you can boot into
"Windows Safe Mode" and then run "Start ! Programs ! ABIT Graphic Max ! Graphic Max Safe
Mode Recovery" to clear previous settings.
1. Move the cursor to the "Install Graphic
Max" and click on it.
Follow each installation procedure shown on
your screen. The software can be installed quite
easily this way.
Important Warning Message
Application Notes
®
95/98 only.
2. Each time you execute the program, you
will see this warning message screen. Please
read the entire message.
When you have read the entire message, click
the "Agree" button to go on.
3-29
User's Manual
Advertisement
Table of Contents
