Table of Contents
Advertisement
3-12
3-3. Display Tray Icon
1. After you have installed the VGA driver,
you can see the "Soft Jumpy" icon on the right
corner of the task bar as shown here.
2. Right click the mouse button on the Soft
Jumpy icon. From the pop-up menu you can
choose the "More Resolution" menu item to
see the resolution table pop-up on left side. You
can directly choose the display resolution you
want.
SILURO
GF2 MX
3. If you want to change the display adapter
refresh rate, please choose the "Refresh Rate"
from the pop-up resolution table on left side,
you can directly choose the display refresh rate
you want.
Note:
Make sure your display monitor
can support the higher refresh rate you
choose, or your display monitor may be
damaged. Please refer to your display
monitor
user's
specifications.
If
you
choose
Properties..." please go to Section 3-2 for
detailed information.
The resolution table shown below the "Refresh
Rate" is a short cut to change to the resolution
and refresh rate you usually use.
Choose "Exit" to leave this program.
Chapter 3
manual
for
detailed
"Windows
Display
Advertisement
Table of Contents
