Maintenance And Cleaning; Internal Cleaning; Cleaning The Filters - Zanussi DE 4744 Instruction Book

Maintenance and cleaning

Internal cleaning

Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with
a damp cloth.
We recommend the use of Finish Dishwasher
Cleaner every 3 months or run a 65°C wash without
dishes using detergent. Regular use of Finish
Dishwasher Cleaner cleans inaccessible parts,
eliminates unpleasant food odours and helps
prevent the build-up of limescale.

Cleaning the filters

The filters in the base of the washing compartment
are to a large extent self-cleaning. Nevertheless the
filters should be checked and cleaned from time to
time. Dirty filters will degrade the washing result.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a
coarse/fine filter, microfilter and a flat filter.
Unlock the filter system using a handle on the
microfilter, and remove.
3. Turn the handle about
and remove.
4. Take hold of the coarse/fine filter (1/2) by the
handle with the hole and remove from the
microfilter (3).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (4) from the base of the
washing compartment and clean both faces
thoroughly.
7. Put the flat filter back in the base of the washing
compartment.
8. Place the coarse/fine filter in the microfilter and
press together.
9. Put the filter combination in place and lock by
turning the handle clockwise to the stop. During
this process ensure that the flat filter does not
protrude above the base of the washing
compartment.
The dishwasher must not be used without
filters.
Incorrect repositioning and fitting of the
filters will produce poor washing results.
Cleaning the filters is vital to ensure
correct operation of the machine.
1 / a turn anticlockwise
4
MA15
MA17
4
MA16
18