Related Manuals for Audio Technica ATW-1701
Summary of Contents for Audio Technica ATW-1701
- Page 1 System 10 Portable Camera-Mount Wireless Digital Wireless System Installation and Operation ATW-1701 UniPak Transmitter System ® ATW-1702 Handheld Microphone System...
-
Page 2: Risk Of Electric Shock Do Not Open
Danger of explosion if battery is replaced incorrectly. If battery dies, send receiver to left empty. Audio-Technica or other qualified service center so battery can be replaced with same or equivalent type. Likewise, send damaged, inoperable receivers to Audio-Technica or other qualified service center for recycling—do not throw away receiver as its battery contains... -
Page 3: Receiver Installation
System 10 Portable Camera-Mount Wireless Installation and Operation Receiver Installation Power Connection Location NOTE: Use only the supplied AC adapter and power cord to power or For best operation the receiver should be at least 3' (1 m) above the charge receiver. - Page 4 System 10 Portable Camera-Mount Wireless Installation and Operation ATW-T1002 Transmitter Setup Controls and Functions Battery Selection and Installation Two alkaline AA batteries are recommended. When inserting the battery, observe correct polarity as marked inside the battery compartment. Power / Battery / Mute Status Indicator Level Control System ID Display...
- Page 5 Transmitter Input Connection Connect an audio input device (microphone or guitar cable) to the audio input connector on the top of the transmitter. A number of Audio-Technica professional microphones and cables are available separately, pre-terminated with a UniPak input connector (see ®...
-
Page 6: System Operation
Power/Battery indicator will glow red while the battery is charging and the acoustic input does not change significantly. turn green when charging is complete. Audio-Technica recommends fully charging the internal battery before using the receiver for the first CAUTION! The small trimmer controls are delicate; use only the time. -
Page 7: System Frequencies
System 10 Portable Camera-Mount Wireless Installation and Operation 6. Repeat for each additional transmitter. Remember to switch off all 3. The transmitter and the receiver should be as close together as con- veniently possible, but not less than 6' (2 m). transmitters already paired before adding a new one and to use a 4. -
Page 8: Specifications
) stereo cable www.audio-technica.com. Para reduzir o impacto ecológico de um documento impresso de várias linguas, a Audio-Technica providência as informações dos seus produtos em diversas linguas na www.audio-technica.com. Per evitare l’impatto ambientale che la stampa di questo documento determinerebbe, le informazioni sui prodotti sono disponibili online in diverse lingue sul sito www.audio-technica.com.