How To Take Accurate Measurements; Measurement (Operation); After Measurement - A&D UB-512 Instruction Manual

Wrist digital blood pressure monitor

Table of Contents

3. How to Take Accurate Measurements

For the most accurate blood pressure measurement:

• Sit comfortably on a chair. Rest your arm on the table. Do not cross your legs. Keep your

feet on the floor and straighten your back.

• Relax for about 5 to 10 minutes before measurement.

• Raise your hand so that the cuff is at the same level as your heart.

• Remain still and keep quiet during measurement.

• Do not measure immediately after physical exercise or a bath.

Rest for twenty or thirty minutes before taking measurement.

• Try to measure your blood pressure at the same time every day.

During measurement, it is normal for the cuff to feel very tight.

Select a measurement mode (operation of the device).

Normal measurement with storing data : ............Press the

Unrecorded measurement : .................................Press both

Recalling data : .....................................................Press and hold the

Clearing data : .......................................................Remove the batteries and re-install them.

After the measurement has completed, remove the cuff and record your data, then press the

button to turn off the power.

Note: The device has an automatic power shut-off function, which turns the power off approximately one minute after

measurement.

Allow at least three minutes between measurements on the same person.

Using the Monitor

START 1

START

English 8

button.

START 2

buttons simultaneously.

button to recall data.

START 1

START 2

START 1

START 2

Table of Contents