Measurements; Normal Measurement With Storing Data - A&D UB-512 Instruction Manual

Note: Model UB-512 can store the last thirty sets of data for each button. We recommend that if two people regularly use the
device, one uses the

Normal Measurement with Storing Data

1. Sit comfortably with the cuff at the same level as your heart and
relax.
2. Press the
START 1
The average recorded blood pressures and data number are
displayed briefly.
Then the display changes as indicated in the figure on the right
as measurement begins.
The cuff starts to inflate. It is normal for the cuff to feel very tight.
Note: If you wish to stop inflation at any time, press either
button again.
3. The measurement starts automatically when pressurizing starts,
and the (heart mark) blinks.
4. When measurement is complete, the systolic and diastolic
pressure readings and pulse rate are displayed.
The cuff exhausts the remaining air and completely deflates
automatically.
5. Press either
START
Remove the cuff.
Note: The device is provided with an automatic power shut-off
function.
Allow at least three minutes between measurements on the
same person.

Measurements

START 1
button and the other uses
(or ) button.
START 2
button again to turn off the power.
START 2
button, to prevent confusion over stored data.
Averaged
data
Data
number
START
Pressurizing
and
Measurement
in progress
Exhausts remaining
air automatically
English 9
START
button
Systolic
pressure
Diastolic
pressure
WHO
Classification
Pulse rate
I.H.B indicator