Hands-Free Phoning - Kenwood KDC-U7049BT Quick Start Manual

Function of KDC-U7049BT, KDC-U7049BTL, KCA-BT200/BT300 (Optional Accessory)

Hands-free phoning

Control knob
[SRC]
Registering cell-phone
Register your Bluetooth cell-phone in
this unit.
KDC-U7049BT KDC-U7049BTL

Press the [ ] button for at least 1
second.
The search for a cell-phone starts. It
takes a while (tens of seconds or several
minutes) to complete.

Press the Control knob when the model
name of a cell-phone to use is displayed.

Enter the PIN code of your cell-phone.
Operation type
Select the numbers.
Move to the next digit.
Delete the last digit.
Transmit the PIN code.
The connection to your cell-phone starts,
after a while "HF Connect" is displayed,
and then returns to the previous source.
When registration of your cell-phone is
complete, the phone book of the cell-
phone is automatically downloaded
to this unit. (If the phone book has not
been downloaded to this unit, operate
the cell-phone to download it.)
8 | Quick Start Guide
KDC-U7049BT
KDC-U7049BTL
[ ] [ ]
[LOG]
Operation
Turn the Control knob.
Push the Control knob
towards right.
Push the Control knob
towards left.
Press the Control knob.
KDC-U6049
KDC-U6049L
[iPod]
KDC-U6049 KDC-U6049L

By operating the cell-phone, register
the hands-free unit (pairing). Select
"KCA-BT200" or "KCA-BT300" from the list
of connected units.

Enter the PIN code of this unit from the
cell-phone.
The PIN code of this unit is "0000" by
default.
When registration of your cell-phone is
complete, the phone book of the cell-
phone is automatically downloaded
to this unit. (If the phone book has not
been downloaded to this unit, operate
the cell-phone to download it.)
Error code list
• "Device Full":
5 Bluetooth devices have already been
registered. No more Bluetooth devices are
registered.
• "PIN Code NG":
The PIN code is wrong.
• "Connect NG":
The unit cannot be connected to the
device.
• "Pairing Failed":
Pairing error.
• "Confirm phone":
Your cell-phone prompts you to confirm.