Printing Photos From A Wireless Communication Device - Canon Pixma MP460 Quick Start Manual

7 Printing Photos From A Wireless
Communication Device
If you have a mobile phone with an infrared port for wireless data transmission, you can
print photos through a cordless connection with the machine. You can also print photos
received from Bluetooth-compatible mobile phones using the optional Bluetooth unit
BU-20. (See the Bluetooth User's Guide)
Performing Infrared Communication
When performing infrared communication, also refer to your mobile phone manual.
1
Turn ON the machine and load the paper in the Auto Sheet Feeder.
(See page 17)
2
Adjust the print settings as necessary.
• You can select the page size, media type, smoothing and layout. (See the User's Guide)
1. Press [Menu].
2. Use [ ] or [ ] to select <Maintenance/settings>, then press [OK].
3. Use [ ] or [ ] to select <Device settings>, then press [OK].
4. Use [ ] or [ ] to select <Wireless print settings>, then press [OK].
5. Use [ ] or [ ] to select the item to set, then use [ ] or [ ] to change the setting.
6. Press [OK] after finishing all settings you need.
3
Oppose the infrared port of the mobile phone to that of the machine at
a distance of less than 20 cm.
• The effective angle of the infrared port of the machine is about 10° from the central axis in both
vertical and horizontal directions.
• The allowable distance of communication with the machine depends on the mobile phone you use.
For this distance, refer to your mobile phone manual.
28

Printing Photos From A Wireless Communication Device

Chapter 7