Getting Connected - Samsung DVD-V6500K Instruction Manual

Getting Connected

There are several ways to connect your
DVD-VCR. Select one of the following
video/audio connecting that best suits you
below.
1. Connecting to a Video input jack
1. Connect a video(yellow) cable between the
VIDEO(yellow) OUT jack on DVD-VCR and
VIDEO(yellow) IN jack on the TV (or AV
amplifier).
2. Connect audio cables(white and red)
between the AUDIO OUT jacks on the DVD-
VCR and AUDIO IN jacks on TV(or AV ampli-
fier).
• You will enjoy regular quality images.
2. Connecting to an S-Video input jack
1. Connect an S-Video cable(not included)
between the S-VIDEO OUT jack on DVD-
VCR and S-VIDEO IN jack on the TV (or AV
amplifier).
2. Connect audio cables(white and red)
between the AUDIO OUT jacks on the DVD-
VCR and AUDIO IN jacks on TV(or AV ampli-
fier).
3. Set the Video Output to S-Video in the
Display Setup menu.
You can use the PROGRESSIVE button to
change the Video Output mode.
• You will enjoy high quality images. S-Video
separates the picture element into black and
white (Y) and color(C) signals to present
clearer images than regular video input
mode.
• Connect audio cables(white and red)
between the AUDIO OUT jacks on the DVD-
VCR and AUDIO IN jacks on TV(or AV
amplifier).
3. Set the Video Output to Component (Interlace, Progressive) in the Display
Setup menu.
You can use the PROGRESSIVE button to change the Video Output mode.
• You will enjoy high quality accurate color reproduction images. Component video
separates the picture element into black and White(Y), blue(PB), red(PR) signals
to present most clear and clean images.
• Make sure that the color coded connections match. The Y,PB,PR component
output jacks of your DVD-VCR must be connected to the exact corresponding
component input jacks on your TV. Otherwise, red or blue images will be displayed
on the TV screen.
S-Video, Component video and Progressive
Output Modes
• S-Video and Component video output are
available only if your TV supports S-Video
input or Component video input, respective-
ly. If S-Video or Component video output
does not work, check the TV connections
and the TV input selection settings.
• Compared to standard interlaced video,
progressive scan doubles the amount of
video beam lines fed to your TV, resulting in
a more stable, flicker-free, and clear image
than interlaced video. The progressive scan
video output jack is used in progressive
output mode. This is only available with TVs
that support progressive scan.
• If you press the PROGRESSIVE button
when DVD-VCR is in stop mode or no
disc is inserted, the Video Output mode
changes in the following sequence:
(S-Video _ Interlace _ Progressive)
4. Connecting to an Audio System(Dolby
digital, MPEG2 or DTS Amplifier)
1. If using a coaxial cable (not included);
Connect Optical cable(not included) between
the DIGITAL AUDIO OUT (COAXIAL) jack on
DVD-VCR and DIGITAL AUDIO IN (COAXI-
AL) jack of the Amplifier.
• When you connect the DVD-VCR to DTS
Amplifier and play a DTS disc, set the DTS
to On in Audio Setup menu. If it is set to
Off, sound will not be heard, or there will be
a loud sound.
• Please turn the volume down when you
turn on the Amplifier. Sudden loud sound
may cause damage to the speakers and
your ears.
5