Part Iii Caring For Your Machine; Cleaning Feed Dog And Shuttle - White 1550 Instructions Manual

-I
PART Ill CARING FOR YOUR MACHINE
CLEANING FEED DOG AND SHUTTLE
Shuttle Race
Fig. 2
39
Fig.
1 Cleaning the feed dog
wi
brush.
To insure the best possible opeo
of your machine, it is necessary to
Using a small brush, remove the lint
accumulates in the shuttle area
around the feed dog.
Fig. 2 Parts of the Shuttle Assembly
To Clean the Shuttle Area:
1. This area must be kept free of
i
lint and occasional tangled thi
Raise the needle to its highest
point and remove the bobbin
2. Push levers of shuttle race aside
Lft shuttle race cover and shuttle
3. Clean the shuttle
race with
b r
Li
sh.
4. Put a drop of Oil on the center p
the shuttle and
shuttle
race
arrows
I.
To Replace Shutti ssernniy
1 Poston shuttle race as ilustraN
that ace is foi ming half mop,
the left side of the machine.
2. Hold shuttle by center pin and
hon shuttle so as to form a ha
on the right side.
Pointed hook
be on the bottom.
3.
Place shuttle race cover into
over shuttle assembly.
4. Snap the levers into position.
I
Lever
Lever
Shuttle Assembly
Shuttle Race Cover
hook
Shuttle
Shuttle driver
*
See additional shuttle cleaner ink
tion on page 43.