Lone Worker - Vertex Standard VX-2100 Series Operating Manual

A O
DVANCED PERATION
EXT. ACC1
Press (or press and hold) the assigned programmable key to toggle output port on
"1" "on" and "off."
EXT. ACC2
Press (or press and hold) the assigned programmable key to toggle output port on
"2" "on" and "off."
D CH#1/CH#2
IRECT
Press (or press and hold) the assigned programmable key to recall the Dealer pre-
programmed channel directly.
AF M V
IN R
Press (or press and hold) the assigned programmable key to reduce the audio output
to the (lower) level programmed by your Dealer.
L W
ONE ORKER
Press (or press and hold) the assigned programmable key to toggle the Lone Worker
feature "On" and "Off."
The Lone Worker feature is designed to emit an alarm for 30 seconds when the Lone
Worker Timer (programmed by your Dealer) has expired. If the user does not reset
the timer by pressing the PTT switch, the radio switches to the Emergency mode.
To revive the radio from the Emergency mode, just press (or press and hold) the
programmable key which is assigned the Emergency feature or turn off the radio.
HA ( H )
A
ORN LERT
Press (or press and hold) the assigned programmable key to turn the Horn Alert
function "ON" or "OFF." If you receive a call from the base station with 2-Tone, 5-
Tone or DTMF signaling, horn alert will be activated and your vehicles horn will
sound.
In the VX-2200, when you turn the Horn Alert "ON," a tone will sound and the
"HORN ALT" will appear on the display.
16 VX-2100/-2200 S O M
ERIES PERATING ANUAL