Removing Jams; Motor Protection System - Filtropur Owner's Manual

Troubleshooting – continued
Removing Jams from Roller Brush
If an object becomes trapped in the Filtropur roller brush, the unit will
automatically shut off the power foot motor and the RED circuit breaker
button located on the power foot will pop up protecting your Filtropur
vacuum power foot motor.
1. Turn the unit off by pressing the main power switch to the "OFF" [O]
position, press the roller brush switch to the "OFF" [O] position and unplug
the power cord from the outlet.
2. Remove object from roller brush.
3. Press to reset the RED circuit breaker
button on the power foot, reinsert power cord
to outlet and turn unit back on by pressing
the main and roller brush switches to the
"ON" position and continue vacuuming.

Motor Protection System

If materials such as soot, cement, plaster dust, copy
machine powder, etc. are picked up, the filter cone
surface may seal and cause the airflow to be restricted to
the motor. This will activate the pressure relief valve to
avoid over heating. You may hear a whistling sound
from the motor, experience a loss of suction, or
expelling debris from the front of the power foot,
indicating you have clogged your system. Please shut
down unit, empty the dirt container, replace filters, and
remove visible clog. Empty dirt container and replace
filters. Check and clear any clogs in hose or access
plate or junction plate at top of machine. After
changing the filters and/or removing clogs, the motor
will have cooled and the Filtropur vacuum will be ready
for continued use.
14