Edge Cleaning; Transporting & Storing Your Filtropur - Filtropur Owner's Manual

Getting Started — continued

Edge Cleaning

Your Filtropur vacuum is designed with an exclusive edge cleaning system
that allows you to effectively clean around baseboards without the use of
attachments. When vacuuming, direct the vacuum unit straight into the wall,
using a firm, but gentle pressure. The Filtropur Edge-Cleaning System design
allows the suction power of the vacuum to remove dirt and dust from hard to
reach areas.
Turning Off Your Vacuum
After vacuuming is complete, press
the toggle switches to the off
(symbol O ) position and remove
power cord from outlet.
Store the power cord around the cord hooks by winding
the power cord into a figure 8 and clip the plug end onto
the cord.
Transporting & Storing Your Filtropur
To carry your Filtropur, push down the handle-
lock button and fold handle counter-clockwise to a
down position until it locks into place.
Make sure the main motor unit is locked in an
upright position.
Now, lift your Filtropur with the carrying handle
and transport as needed.
8