Basic Waypoint Selection - Honda TRX500FA Owner's M Operation And Instruction Manualanual

There are two methods for marking waypoints.
Basic (to select your current position)
Advanced (to input desired destinations)

Basic Waypoint Selection

To Mark Your Present Position:
1. Turn the ignition switch ON ( ).
2. Use the GPS/WP button ( ) to select the GPS mode (page
3. To select a higher waypoint number ( ), press and release the plus
button ( ). 3
To select a lower waypoint number, press and release the minus
button ( ). 4
To fast scroll, press and hold the plus or minus button until the
desired waypoint number appears.
4. Press and hold the GPS/WP button for about 2 seconds, until the
waypoint number and waypoint distance ( ) flash. Then release the
button.
(2)
(1) GPS/WP button
(2) waypoint number
(3) plus button
GPS Mode
1
2
5
(5)
(4)
(4) minus button
(5) waypoint distance
GPScape System
66 ).
(1)
(3)
(cont'd)
71