Samsung 210P plus User Manual page 21

Connecting Your
Monitor
With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable
Installing the
Monitor Driver
viewing angle.
Base Installation
Note: The base is detachable.
Attaching the Base
1. Place the monitor upside-down on a flat work surface.
2. Align the tabs on the base with the corresponding slots on the bottom of the monitor.
3. Press the base onto the monitor until the tabs are fully engaged in the slots.
4. Push the base toward the front of the monitor until the release latch clicks into the locked
Main > Setup > Base Installation
|
Tilt/Swivel Base Attaching and Removing the Base