Requirements And Limitations - Cisco Remote Control Quick Start Manual

1

Requirements and Limitations

Cisco Digital Media Player (DMP) 4400G devices, and 4305G
devices after July 2008, are compatible with a remote control
that is sold separately. Its features require that your DMPs use
firmware release 5.0 or later and that your Cisco Digital Media
Manager (DMM) appliances use DMM software release 5.0 or
later. If you are upgrading from an earlier release of Cisco DMS,
you can log in to your Cisco.com account, and then download
the required software and firmware at
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=
281723656.
Most DMM features that this guide describes, which respond to
the remote control, are licensed features that must be installed
and configured on your DMM appliance and enabled on your
DMPs. To learn about the DMM features that you can license
and install, see http://www.cisco.com/go/dms.
A printed copy of this guide (Remote Control Quick Start Guide
for Cisco Digital Media Players) is included in the product kit
with each DMP remote control. Alternatively, you can read this
guide on Cisco.com.
5