7. Turn the jack upside down so the small wing nut
holding the wheel blocks is facing the battery box.
Pulling the jack out this way will reduce the
potential of scratching the battery cover.
9. Loosen the wing nut on top of the wheel blocks by
turning it counterclockwise to separate the wheel
blocks from the jack.
When you are finished, place the tools in the storage
bag and reinstall the tools in the vehicle by reversing the
removal procedure. Reinstall the wheel blocks to the
jack and reinstall the jack back into the vehicle by
reversing the removal procedure.
8. Push the seat cushion
back while pulling the
jack out.
5-27