System Requirements - Cisco 811 Release Notes

System Requirements

System Requirements
This section describes the system requirements for Release 12.1(2)XF5 and includes the following
sections:
•
•
•
•
•
Memory Requirements
This section describes the memory requirements for the Cisco IOS feature sets supported by Cisco IOS
Release 12.1(2)XF5 on the Cisco 811 and 813 Routers.
Table 1
Platforms
Cisco 811
and 813
Hardware Supported
Cisco IOS Release 12.1(2)XF5 supports the following Cisco 800 series routers:
•
•
For detailed descriptions of new hardware features, see New and Changed Information, page 6.
Table 2
Router
Cisco 811
Cisco 813
Release Notes for the Cisco 811 and 813 Routers for Cisco IOS Release 12.1(2)XF
2
Memory Requirements
Hardware Supported, page 2
Determining Your Software Release, page 3
Upgrading to a New Software Release, page 3
Feature Set Tables, page 4
Memory Requirements for the Cisco 811 and 813 Routers
Image Name
IP
IP Plus
IP/IPX Plus
IP/FW
IP/FW Plus IPSec 56
IP/IPX/FW Plus IPSec 56
Cisco 811
Cisco 813
Supported Interfaces for the Cisco 800 Series
Ethernet LAN Ports
One 10BaseT (RJ-45)
One 10BaseT (RJ-45)
4-port hub
Image
c800-y6-mw
c800-sy6-mw
c800-nsy6-mw
c800-oy6-mw
c800-osy656i-mw
c800-nosy656i-mw
Ethernet WAN Ports
• One ISDN BRI U,
integrated DSU (RJ-11),
One ISDN BRI S/T (R-J45)
•
One ISDN BRI U,
•
integrated DSU (RJ-11),
• One ISDN BRI S/T (R-J45)
Required Required
Flash DRAM Runs
Memory Memory From
4 MB 8 MB RAM
4 MB 8 MB RAM
4 MB 8 MB RAM
4 MB 8 MB RAM
8 MB 8 MB RAM
8 MB 8 MB RAM
Analog Phone Console
Ports Ports
– RJ-45
Two (RJ-11) RJ-45
78-11070-02, Rev. H0