Gas Connection - Miele KM 362 Operating Instructions Manual

Connection to the gas supply, or
conversion from use of one type of
gas to another should only be
undertaken by an approved fitter,
who is responsible for the correct
functioning of the appliance when
installed. Every appliance should
have its own isolating valve.
Check with your local gas supplier
about the type of gas and its
calorific value and compare this
information with the type of gas
quoted on the data plate.
The gas installation must be made in
such a way that the isolating valve is
visible and easily accessible.

Gas connection

Depending on country of destination
this appliance is set up for connection
to natural or liquid gas (see adhesive
label on the appliance).
Depending on country of destination
jets are supplied for conversion to a
different type of gas.
If the appropriate jets have not been
supplied with the appliance you will
need to contact your dealer or the
Technical Service Department.
Conversion to another type of gas is
described in the separate Installation
Instructions supplied with this hob.
25