Philips TV User Manual page 26

EXTERNAL
1/2/3
1
DVD
Connect Peripheral Equipment
26
Camera & camcorder
&
Connect your camera or camcorder to sockets at the right side of your TV.
é
Connect the equipment to
equipment.
"
Press the X key repeatedly to select the sound coming from one or
both loudspeakers of your TV.
3
2
'
1
For stereo equipment also connect
S-VHS quality with a S-VHS camcorder is obtained by connecting the S-VHS
cables with the
Digital and other equipments
Connect your digital equipment with a eurocable 1 to one of the
euroconnectors (
input at the right side of the TV (see illustration above).
&
Press U and f at the same time.
INSTALLATION
Menu language
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
J SETUP SETUP
é
Select
select:
•
None
•
EXT1
euroconnector,
•
FRONT
"
Press the Ï key to switch off all menus.
Note: the low quality of some digital picture material may be the cause of digital
image distortion. In this case select
remote control as this setting is intended to improve distorted picture quality.
Headphone
&
Insert the plug into the headphone socket L at the right side of the TV.
é
Press ¬ on the remote control to switch off the internal loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
volume. See p. 12.
VIDEO
input 1 and
S-VIDEO
, or
EXT1 EXT2 EXT3
in the Setup menu of the
Digital sources
if you have no digital source connected,
, or if you have connected your equipment to a
EXT2 EXT3
in case you connected to the right side of the TV-.
Eco
menu select
Headphone volume
SOUND
2 and 3 for mono
AUDIO L
3.
AUDIO R
inputs 3.
AUDIO
), or with a cinch cable to the
SETUP
J Digital sources
Digital Sources
Decoder/Descrambler
Information Line
Factory settings
Extra front speakers
Rear speakers
Auto surround
TV provider
NEX IEW
Auto Format
DBE
INSTALLATION
INSTALLATION
a key on the
under the
SMART PICTURE
to adjust the headphone
VIDEO
on/off
none, 0...99
yes/no
menu and