Technika 15.4-311 User Manual page 33

Chapter/Title Display
The Chapter/Title display function is used to display the current title number, chapter number and
the current time location. The display box is positioned at the top of the screen.
1. Press the D.DISP button repeatedly to cycle through the Chapter/Title display information. The
available types of information are:
• Title, chapter and total time elapsed
• Audio, subtitle and angle information
• Chapter remaining
• Title elapsed
• Title remaining
Programme
The programme function can be used to play your DVD titles and chapters in a pre-programmed
order. A sequence of up to twenty titles and chapters can be set. A title and chapter can be set
more than once. It is not necessary to programme all slots in the sequence.
1. Press the PROGRAMME button. The Programme window will be displayed as shown below.
2. Press the buttons to select a programme number.
3. Press the Numeric buttons to enter the title number.
4. Press the Numeric buttons to enter the chapter number.
5. Press the  button to select the second programme number.
6. Repeat the previous steps to enter the next title and chapter.
7. Repeat for as many programme numbers as required.
8. Once you have programmed all the titles and chapters use the buttons to select PLAY.
Press the OK button Your programmed selection will begin.
9. To cancel the programme, press the PROGRAMME button and select 'CLEAR' using the
buttons. Press the OK button.
Tesco-Tecknika IDTV with DVD Player UK .indd Sec1:31 Tesco-Tecknika IDTV with DVD Player UK .indd Sec1:31
User Guide
31
07/07/2009 16:41:59 07/07/2009 16:41:59