Introduction HDMI Safety is Important In the box Safety Information Keep these instructions Important Electrical Information Parts Identification Front panel Local keyboard panel Back panel Connecting the TV Connecting the TV antenna Connecting external devices Connecting diagram Common Interface slot Common Interface Wall Mounting Wall Mounting...
Page 4
DVD Function Setup Picture Sound DVD Settting Function Troubleshooting Display Troubleshooting Sound and TV Troubleshooting DVD Troubleshooting Specifications Specifications Display Mode Display Mode Additional Information Care and Maintenance (Handling Discs) Disposal Warranty Contents...
Throughout the remainder of this user guide the Technika HD Ready LCD/DVD TV will be referred to as the ‘TV’. HDMI HDMI (High Defi nition Multimedia Interface) is the next generation of digital interface.
IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE Take note of the following safety information which appears on the back of this TV. CAUTION! RISK OF ELECTRIC SHOCK DO NOT OPEN. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
the user is encouraged to try to correct the interference by one of the following measures: • Re-orient or relocate the receiving antenna. • Increase the separation between the external device and the TV. • Connect the external device into an outlet on a circuit different from that to which the TV is connected.
FRONT PANEL 1. IR sensor window 2. Indicator (the indicator is red when in standby mode, and green when in working normally). LOCAL KEYBOARD PANEL PLAY/ II EJECT TV/AV VOL+ VOL- MENU POWER PLAY/ II – start of play or pause of play EJECT –...
WARNING! ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS UNPLUGGED FROM THE MAINS BEFORE MAKING ANY CONNECTIONS! Connecting the TV antenna Connect the TV antenna to the aerial socket with a 75 ohm co-axial plug. For best results use a high gain TV aerial, preferably roof or loft mounted.
Connecting the TV CONNECTING DIAGRAM NOTE You should insert all necessary cables BEFORE pluggin g in po wer cor d. User Guide 32" HD Ready LCD/DVD TV...
COMMON INTERFACE The Common Interface (CI) slot is designed to accept the Conditional Access Module (CAM) and Smart Card in order to view the pay TV programmes and additional services. Contact your Common Interface service provider to get more information about the modules and subscription.
WALL MOUNTING Suitable for wall mounting - VESA 400 x 200 mm 1. The base must first be removed. Place the TV face down. 2. Remove the three screws holding the base in position. 3. Remove and store the base and screws.
BATTERY INSTALLATION Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of the battery to the -/+ marks inside the battery compartment, as follows: BATTERY LIFE Normally, battery can be used for one year. If the remote control is still not working, when very near to the TV's remote sensor window, please use new batterys.
SWITCHING ON After the unit has been suitably placed / fixed, on the table or on the wall, and all necessary cables including the power have been connected, Press the [STANDBY] button on the remote control to make the unit switch to power-on mode - you will see the LED indicator turn green.
TV mode, press [SETUP] button into the main menu and the main menu will show as follows: Press [ ] button on the remote control, you can select main menu sections (main menu sections consist of) Press [ ] or [OK] button to enter this menu section. Press [ ] button on the remote control to select the item, and then press [ adjust parameter value.
Page 19
Audio Language item enables you to adjust audio language. Subtitle language item enables you to Time item enables you to enter submenu. Clock to adjust the real time. Time Zone to adjust the time zone from Canary GMT to Berlin GMT+1. Daylight to adjust summer time off or on.
Change password item enables you to change the locked password. Block Programme item enables you to set the lock channel. Parental Guidance item enables to set guidance (0ff, from 4 to 18). CI Information item enables to read the information. Hearing Impaired item enables to set the hearing impaired off or on.
Page 21
ELECTRONIC PROGRAM GUIDE (EPG) By pressing the EPG button, an Electronic Program Guide is displayed. The EPG supplies information, such as program lists, start and end times of all available channels. In addition, the detailed information about the program is often available in the EPG.
SOUND Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance, Auto Volume and Surround Sound. Sound Mode item can be changed between Music, Film, News, User. Auto Volume item enables you to adjust off or on for control volume automatic.
This product can store up to 99-channel programs (1 99). You can select your favourite channel through pressing [CH+/-] or number buttons, and you can scan and store all of the channels through manual or automatic mode. In TV mode, press [SETUP] button into the main menu and the main menu will show as follows: Press [ ] button on the remote control, you can select main menu sections (main menu sections consist of...
Programme Edit item enables you to set channel DELETE, RENAME, MOVE, SKIP, FAV. Press RED button to delete channel. Press GREEN button to rename channel. Press YELLOW button to move channel. Press CYAN button to SKIP channel. Press FAV button to set favourite channel. PICTURE Select PICTURE item to adjust picture parameters.
SOUND Select SOUND item to adjust sound parameters. You may adjust Sound Mode, Treble, Bass, Balance, Auto Volume and Surround Sound. Sound Mode item can be changed between Music, Film, News, User. Auto Volume item enables you to adjust off or on for control volume automatic.
Most TV stations provide cost-free teletext information, including the latest news, weather information, TV program list and stock information etc. You just input the needed teletext page according to the teletext content. Note : Press [CANCEL] button to cancel teletext. ZOOM IN TELETEXT When teletext page shows, you may double zoom in to display this teletext page;...
SCART / S-VIDEO / HDMI Menu Setup VIDEO SETTING MENU The menu setup of SCART/ S-VIDEO/ COMPONENT/ HDMI modes is the same as that of TV mode, except the " "section . You can find it in preceding pages. NOTE If no signal input in DTV, ATV, SCART/ AV / S-VIDEO/ COMPONENT/ HDMI, the screen will show as below.
The VGA mode supported up to 1366X768@75Hz(for 32"), you can use this unit as a multimedia PC monitor. When this unit works in VGA mode, the following setup can be done. Press [SETUP] button to enter main section. Press [ press [ ] button or [OK] button to enter.
P I C T U R E Select PICTURE item to adjust such parameters as Colour Temp, Red, Green, Blue. Colour Temp item can be set to: User, Standard, Warm and Cool. Red, Green and Blue items enables you to adjust RGB value of colour temperature.
BRIEF INTRODUCTION DVD provides brand-new AV effect for consumers with its extraordinarily large capacity and outstanding audio-video effects. Its capacity is as high as 4.7-17 GB (approximately 7-26 times the CD capacity) and horizontal resolution of picture is above 500-line. Comparison between DVD and other Discs Digital/MPEG2 Recording Method...
Disc Pictures 16:9 FEATURES This player employs the new generation MTK decode chip with more convenient system and more stable operation. Super error correction slot-in loader with twin laser with good shockproof performance. Brand-new AV Effects Compatible with MPEG 4 format discs to produce wonderful pictures. 108MHz/12bit video DAC with more vivid and brilliant pictures.
COMPATIBLE DISC TYPES Types Sizes 12cm 12cm 12cm MPEG4 12cm DIGITAL VIDEO 12cm NOTES Issues related to These icons on the top banner indicate the disc types that the function described in the section applies to. Applies to DVD disc MPEG4 Applies to MPEG4 disc SVCD...
PLAYBACK MPEG4 SVCD 1. Power on and switch signal source to DVD mode and the unit begins to work. 2. Place the disc (with label side facing user) to the door and the unit will draw in the disc automatically. The unit begins to read disc information.
VCD, SVCD MENU PLAYBACK SVCD When playing SVCD, VCD2.0 discs with the menu playback function, you may enjoy simple menu playback alternative function. You may set menu playback state in the setup menu and select menu playback or sequence playback. For instance, VCD 2.0 disc menu playback.
SELECT TRACK TO PLAY DIRECTLY BY NUMBER BUTTONS SVCD 1. Insert disc, after disc reading and normal playback, press number buttons to select track to play directly. If track number is less than 10, press number buttons 1 to 9 to directly select. For instance, select the seventh track: If track number is more than or equal to 10, press [-/- -] button and then number buttons 0 to 9.
REPEAT PLAYBACK MPEG4 SVCD The repeat playback function enables a certain title/chapter/track/disc repeated. 1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions. DVD DISC: SVCD, VCD, CD discs: To SVCD, VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1, CD discs, the repeat function may be directly operated.
FAST PLAYBACK MPEG4 SVCD When playing discs, you may select fast forward or fast backward playback to search for a certain point. 1. Press [ ] button and the unit begins fast forward playback. Press [ ] button each time and the disc playback speed switches in the following sequence circularly: 2.
Play MPEG4 disc 1. Select track Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input the track. 2. Search track time Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second.
MPEG4 AND JPEG FILE PLAYBACK MPEG4 is the audio standard published by MPEG(Moving Pictures Experts Group) in November,1998. As the discrepant parts between frames of picture are only processed and the same parts are deleted, the data number are greatly decreased. The most distinct feature of MPEG4 is the high compression and clear imaging.
Page 40
1. Play MPEG4 file After you put an MPEG4 format file into the unit, it will search disc information and display the operation menu as figure A (The displayed content varies with disc.). 00:00 00:00 001/004 Du000 Du001 Du002 Du003 Press [ ] button to select the directory you desired and press [OK] button to confirm.
Page 41
3. When playing JPEG file, pressing [ At the same time, all JPEG files are displayed on the TV screen. One frame can display up to 12 pictures at most. The other ones are shown on the next frame. Pressing [ enter the next frame and [ buttons or [ ] button to select the picture you desired and press [OK] button to confirm.
PICTURE Select PICTURE item to adjust picture parameters. You may adjust Picture Mode, Contrast, Brightness, Colour, Sharpness, Tint and Preference. Picture mode item can be changed between , Soft, Dynamic. User, Standard You may adjust Brightness, Contrast, Colour , Sharpness, Tint for User mode. Preference item enables you to enter sub menu.
Page 43
GENERAL SETUP You may select TV DISPLAY, SCREEN SAVE and DOWNMIX and Divx. TV display: this item is used to set the output picture ratio of this unit. Optional settings: Normal/Pan-Scan, Normal/Letterbox, Wide Screen; Default: Normal/Letterbox Screen Save: Open or close the screen saver Optional settings: Off, On;...
NOTE Audio, subtitle and disc menu language are only effective to DVD disc. If the disc is not recorded with the language you appointed, the unit will apply the language that the disc appointed to play. Select other languages: press [ and then number buttons to input the language code you desire.
Please check for causes of problems in accordance with the following chart before contacting any maintenance personnel. DISPLAY TROUBLESHOOTING Symptom Black screen, power indicator light off Image display flicker, unstable SOUND AND TV TROUBLESHOOTING Symptom Cannot power on No sound Volume too low Snowy picture Remote control failure...
DVD TROUBLESHOOTING Symptom 1. Condensation on laser head 2. Disc not properly loaded Not play 3. Disc not compatible with the unit 1. Too large volume of connected device Sound distortion 2. Sound field mode not suitable for disc 1. Disc warped or dirty No sound 2.
LCD Screen 32": 81 cm Panel Resolution Input signal CVBS Analog RGB YPbP YCbCr S-video User Guide 32" HD Ready LCD/DVD TV 32": 1366 x 768 Video System PAL SECAM Frequency Band 42.25-- 863.25 MHz BG/DK/I/L/L’ Sound System NICAM/A2 VLF(50.5-142.5MHz) Frequency Band VHF(149.5-426MHz UHF(434-858MHz)
Page 48
Scart 1 Scart 2 HDMI1/HDMI2 Audio Input Level Comb Filter Teletext 1000 Page INPUT Terminals Output Power Standby Mode Amplifier Other Full Scart Half Scart 480i,576i,1080i,480p,576p,720p Format 1080P 0.2 2 Vr.m.s. TV/DTV 1 IEC 75 Analog RGB 1 D-SUB 15 Jack SCART1 1 SCART Jack SCART2...
Below the preset mode for VGA YPbPr (pixel format H-Frequency and V-Frequency) ANALOGIC RGB FORMAT TABLE Pixel Format Resolution SXGA 1280X1024 SVGA 640X480 720X400 YPbPr FORMAT TABLE Format 576i 480i 576p 480p 1080i/50 1080i/60 720p/60 1080P/50 1080P/50 NOTES This product does not support the display mode not listed above. In order to achieve the best display effect, please select the above-listed 20 display modes input signal.
Care and Maintenance Handling Discs • To remove a disc from its storage case, press down on the centre of the case and lift the disc out. • Discs should be returned to their cases after use. This avoids serious scratches that could cause the laser pickup to skip.