Table of Contents
Advertisement
Additional user preferences
- Disconnect the recorder's power cord.
- Hold down N on the DVD Recorder while reconnecting the power
cord. 'PRO' (progressive scan) appears on the display.
- If you want to switch back, hold down N until 'PRO' disappears
from the display. The DVD Recorder is switched to 'Interlaced.'
Sound settings
You can select the settings in this menu depending on which audio
outputs are used.
If you only use only the analog audio outputs (red and white jack
AUDIO L/R (OUT 2) , AUDIO L/R (OUT 1) ), select the setting
'Off' in the 'Digital output' menu.
Digital output
Analog output
Night mode
'Digital output'
You can select one of the following settings for devices that are
connected to the COAX OUT or OPTICAL OUT jacks:
O
'All'
Dolby Digital and DTS signals are fed unaltered to the digital
output. MPEG-2 multi-channel signals are converted to PCM
(Pulse Code Modulation).
For receivers/amplifiers with digital multi channel
decoders.
O
'PCM only'
Digital and MPEG-2 multi-channel signals are converted to
PCM (Pulse Code Modulation). For receivers/amplifiers
without digital multi channel decoders.
O
'Off'
Digital output switched off.
For devices with analog audio input.
65
'Analog output'
You can select one of the following settings for devices that are
connected to the analog audio output AUDIO L/R (OUT 2) or
AUDIO L/R (OUT 1) :
'Night mode'
Night mode optimizes the sound for playback at low volume. You are
therefore less likely to disturb your neighbours. This only works with
Dolby Digital audio on DVD video discs.
Sound
All
Stereo
Off
You can select the following settings in this menu:
'Playback audio'
Playback audio language.
'Subtitle'
Subtitle language
'Menu'
Screen menu language
O
'Stereo'
For devices without DolbySurround or TruSurround. Use this
setting if the DVD recorder is only connected to a stereo TV
set.
O
'Surround'
Dolby Digital and MPEG-2 multi-channel are mixed down to a
Dolby Surround-compatible two-channel output signal.
For devices with Dolby Surround / Pro Logic Decoder .
Language settings
Playback audio
Subtitle
Menu
Language
English
English
English
Advertisement
Table of Contents
