Parental Lock - Emerson EWC19T1 Owner's Manual

TD351_35-55 02.2.18 1:42 PM Page 47
AUDIO SETTINGS
1
Press the SETUP button.
¡
The setup screen will appear.
2
K /
Press the
then press the ENTER button.
Audio Controls
Digital Audio Out
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
3
K / L
Press the
then press the ENTER button. (Choose
Digital Audio Out and press the ENTER but-
ton to set Dolby Digital, DTS, and MPEG. Go
to step 4.)
Digital audio out setting (Next step)
Audio Controls
Digital Audio Out ...
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Digital Audio Out
Dolby Digital Off
DTS Off
Audio
MPEG Off
Dynamic Range (Default : Off)
On : Dynamic range is available
Audio Controls
Digital Audio Out ...
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
¡
This function is for controlling the range of sound
volume. By compressing the range of sound vol-
ume, it is possible not only to suppress the output of
loud sound at night and but also to raise the volume
of low sound.
¡ However, this function is effective only for the
sound recorded by Dolby Digital recording. When
the sound recorded by Dolby Digital 5.1ch is out-
putted, the sound is compressed automatically even
with this function being set at "Off".
Downmix Mode
(Default: Dolby Surround)
Audio Controls
Digital Audio Out ...
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Language
Display
Audio
Parental
Select : /
Cancel :
L
buttons to select Audio and
...
buttons to select an item, and
If you select Digital
Audio Out, the screen
changes to step 4. If
you want to set other
items of step 3, press
the K / L buttons.
To select Dynamic
Range On or Off,
press the ENTER
button repeatedly.
To select Downmix
Mode Stereo or
Dolby Surround,
press the ENTER
button repeatedly.
Dolby Surround: When the unit is connected to an
audio component that conforms to
Dolby Surround Pro Logic
Stereo: When the unit is connected to a normal audio
component
Down Sampling (Default : 48kHz)
Set the output for the DVD recorded in PCM 96kHz
Set : ENTER
Exit : SETUP
(96kHz or 48kHz)
Audio Controls
Digital Audio Out ...
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
4
K
Press the
and then press the ENTER button.
¡ If PCM, Dolby Digital or DTS MPEG is selected on
the Digital Audio Out setting screen, press the
buttons again to select a further item, and then press
the ENTER button.
Dolby Digital (Default : Off)
On : Output by Dolby Digital.
Set to On when the unit is connected to Dolby Digital
Decoder.
Audio Controls
Digital Audio Out
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Digital Audio Out
Dolby Digital On
DTS Off
Audio
DTS (Default : Off)
On : Output DTS sound
Set to On when the unit is connected to DTS
Decoder.
Audio Controls
Digital Audio Out ...
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Digital Audio Out
Dolby Digital Off
DTS On
Audio
MPEG Off
MPEG (Default : Off)
On : Output by MPEG
Off : Convert the MPEG to PCM
Audio Controls
Digital Audio Out
Dynamic Range On
Language
Downmix Mode Dolby Surround
Down Sampling 48kHz
Display
Digital Audio Out
Dolby Digital Off
DTS Off
Audio
MPEG On
Set to On when the unit is connected to MPEG2
Decoder.
5
Press the SETUP button.
¡
The setup mode will be canceled and the ordinary
screen will appear.
– 47 –
To select Down
Sampling 48kHz or
96kHz, press the
ENTER button
repeatedly.
/ L
buttons to select a desired item,
To select Dolby
...
Digital On or Off,
press the ENTER but-
ton repeatedly.
To select DTS On or
Off, press the
ENTER button
repeatedly.
To select MPEG On
...
or Off, press the
ENTER button
repeatedly.
K / L
EN
01A11