Daylight-Saving Time - Sylvania 6313CE Owner's Manual

1
Select "SETTING CLOCK"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to select "SETTING CLOCK".
Press the F.FWD/B button to enter
"SETTING CLOCK" menu.
2
Set "AUTO CLOCK" to [ON]
Press the F.FWD/B button until
"AUTO CLOCK [ON]" appears.
3
Begin "AUTO CLOCK CH SEARCH"
Press the STOP/L button to select
"AUTO CLOCK CH SEARCH".
Press the F.FWD/B button.
•
The TV/VCR is now searching
for the station which contain the
auto clock set signal. The search
for a signal may take up to 20
seconds per channel.
•
"_ _" appears at the lower left of
the screen when the search has
ended.
•
Auto Clock station- write down
the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See item 4 below.
•
If no number(s) appear on the TV screen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 11.
Press the MENU button to exit the screen.
NOTE: During Auto Clock CH Search, the picture
may be distorted. This is normal.
4
Enter the channel number that contains the
Automatic Clock Setting Signal
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to select "SETTING CLOCK".
Press the F.FWD/B button to enter
"SETTING CLOCK" menu.
Press the STOP/L button to select
"AUTO CLOCK CH".
Press the F.FWD/B or REW/s
buttons until you locate Auto Clock
Set station number. See item 3
above.
Press the MENU button to exit the screen.
5
Once the TV/VCR is turned off , it will periodically
– M E N U –
check and set the correct date and time.
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
Select this feature and the TV/VCR's clock automati-
cally will advance one hour in April, then reverse one
hour in October.
– SETTING CLOCK –
When Daylight-Saving Time is ON, the clock will
B AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
change automatically as follows:
MANUAL CLOCK SET
D.S.T. [OFF]
•
First Sunday of April :
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
•
Last Sunday of October :
– SETTING CLOCK –
immediately changes to 1 AM.
AUTO CLOCK [ON]
Make sure ...
B AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
•
Press the POWER button to turn on the TV/VCR.
D.S.T. [OFF]
1
Press the MENU button on the
remote control.
– AUTO CLOCK CH SEARCH –
Press the PLAY/K or STOP/L but-
08 10 13
ton to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
_ _
2
Press the PLAY/K or STOP/L but-
ton to point to "D.S.T.".
Then, press the F.FWD/B or
REW/s button until [ON] appears.
3
Press the MENU button on the remote control to
return to TV mode.
TO CANCEL THE DAYLIGHT-SAVING
– M E N U –
TIMER PROGRAMMING
TIME
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
Repeat steps [1] to [2], select [OFF] using the
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF] F.FWD/B or REW/s button.
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH [ 45]
MANUAL CLOCK SET
D.S.T. [OFF]
- 12 -
Turn off the TV/VCR

DAYLIGHT-SAVING TIME

At 2 AM the clock imme-
Select "SETTING CLOCK"
Set "D.S.T." (Daylight-Saving Time) to [ON]
Exit the Daylight-Saving Time mode
At 2 AM the clock
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
B D.S.T. [ON]
EN
9I03