T5205.QX33
01.2.5
7:27 PM
INDEX SEARCH
This feature provides a method of indexing the start-
ing point so that it can be easily returned to in either
fast forward or rewind mode.
•
The index mark will be made automatically when
the REC button is pressed. It will also be marked
at the starting point of Timer recording and OTR.
•
The index mark will not be recorded if the
PAUSE/STILL button is pressed and released dur-
ing recording.
•
The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.
Example: You are watching program number 4 and
want to fast forward to program number 7. You
must skip three programs.
CURRENT PLAYBACK PROGRAM
Beginning of tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
4
3
2
INDEX MARK
1
Select "INDEX SEARCH"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L
button to point to "INDEX
SEARCH". Then, press the
F.FWD/Bbutton
2
Enter your desired number
Press the PLAY/K or STOP/L
button until the number of pro-
grams that you want to skip
appears.
(Example: "03" for 3 programs)
•
The Index Search mode will be
canceled if the procedures are not activated in 30
seconds.
Page 24
End of tape
1
1
2
3
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
INDEX SEACH
0 3
3
Begin Index Search
Press the REW or F.FWD button. The TV/VCR
begins rewinding or fast forwarding to the beginning
of desired program.
NOTE: Every time an index signal is skipped, the
number in the program indicator decreases by one.
4
After Index Search
When the preset program is reached, the TV/VCR
will start playback automatically.
•
A video cassette must be inserted in the TV/VCR
for this function to work.
•
The number of Index Searches can be set up to 20.
•
This function will not operate in the recording mode.
•
When you want to cancel the Index Search while
in progress, press the STOP button.
- 24 -
EN
0M05