Table of Contents
Advertisement
T4302.QX33
02.1.16
3:10 PM
TO CANCEL AN AUTOMATIC TIMER
RECORDING
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 20 and select a
program you want to cancel.
3)Press the T-PROG. CLEAR button.
4)Press the MENU button on the remote control to
return to TV mode.
•
While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the TV/VCR.
TO CHECK THE BEGIN/END TIME
1)Press the POWER button so that the REC indicator
goes off.
2)Press the MENU button on the remote control.
3)Confirm "TIMER PROGRAMMING" is pointed.
4)Press the F.FWD/B button. The details of pro-
grams appear on the TV screen.
5)Press the MENU button on the remote control to
return to TV mode.
HINTS FOR AUTOMATIC
TIMER RECORDING
•
Make sure the channel you want to record is prop-
erly set in advance.
•
It is not necessary to press the RECORD button for
timer recording.
•
Recording begins automatically at the Start time.
•
If you are recording using a Timer mode, you may
not operate the unit manually.
•
The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
•
If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
•
If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, and the tape will be ejected.
AUTO RETURN
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1
Select "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "USER'S SET UP".
Then, press the F.FWD/B button.
Page 22
Press the PLAY/K or STOP/L but-
ton to point to "AUTO RETURN".
Press the F.FWD/B or REW/s
button until [ON] appears. Then,
press the MENU button on the remote control to
return to TV mode.
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTE:
•
Press the PLAY button.
TO CANCEL THE AUTO RETURN
MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button.Then, press the MENU
button on the remote control to return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
•
•
•
Press the WAKE-UP/SLEEP button
on the remote control once, and
confirm "ON/OFF" is pointed.
Press the F.FWD/B or REW/s
button until [ON] appears.
– M E N U –
TIMER PROGRAMMING
Press the PLAY/K or STOP/L but-
PICTURE CONTROL
SETTING CLOCK
ton until to point to "TV/TAPE".
CHANNEL SET UP
B USER'S SET UP
LANGUAGE [ENGLISH]
Press the F.FWD/B or REW/s
ZERO RETURN
TIME SEARCH
button, and select [TV] or [TAPE].
- 22 -
2
Set "AUTO RETURN" to [ON]
3
Auto Return will begin
If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4
Watch the recorded program
WAKE UP TIMER
Use the remote control for this procedure.
Clock must be set to the correct time before setting
the timer.
If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1
Select "WAKE UP TIMER"
2
Select "TV" or "TAPE"
– USER'S SET UP –
RENTAL
[OFF]
REPEAT PLAY
[OFF]
B AUTO RETURN
[ON]
WAKE UP B ON/OFF
[ON]
TIMER
TV/TAPE
[TV]
TIME
[12:00AM]
WAKE UP
ON/OFF
[ON]
TIMER
B TV/TAPE
[TV]
TIME
[12:00AM]
EN
9J27
Advertisement
Table of Contents
