Manual Tv Channel Search - Philips DVD Recorder Manual

Installation
Manual search
Channel/freq.
Entry/search
Programme number
TV channel name
Decoder
TV system
NICAM
Fine tuning
Installing your DVD recorder

Manual TV channel search

In some cases, not all of the available TV channels may have been found and stored during initial
installation. In this case, you will need to search for and store the missing or coded TV channels
manually.
Manual search with EasyLink
With 'Easy Link', the DVD recorder will automatically download the TV
channels stored on the TV set. This is why some lines have no function. To
store new TV channels, they must first be stored on the TV set. The
information will then be transferred to the DVD recorder automatically.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON m .
3
Press
appears.
4
Select '
5
Select 'Installation' using CH- B or CH+ A and confirm with C .
6
Select 'Manual search' using CH- B or CH+ A and confirm with
C .
7
In 'Channel/freq.', select the desired display using C .
'Freq.'(Frequency), 'CH'(Channel), 'S-CH'(Special/hyperband channel)
CH
8
In 'Entry/search', enter the frequency or channel of the TV station
01
using the number buttons 0..9 .
01
BBC1
Off
PAL-BG
a I don't know the channel for my TV station
On
b In this case, press C to start the automatic search. A changing channel
0
To store
number/frequency number will appear on the TV screen.
Press OK
Continue the automatic search until you have found the TV channel you
are looking for.
9
Using D or C in 'Programme number', select the programme
number you want to use for the TV channel, e.g. '01'.
SYSTEM-MENU on the remote control. The menu bar
' symbol with D or C .
A
Tip
Problem
25