Philips AZ 4000 Operating Instructions Manual page 16

MP3-CD/ CD Playback
3 Repeat steps 1 and 2 to select and store all
desired tracks in this way.
is displayed if you
attempt to program more than 30 tracks.
4 To play your program, press
PLAY/ PAUSE 2;.
To review a program
• In the stop position, press and hold down
PROGRAM for more than 2 seconds.
Display shows all your stored track
numbers in sequence, or the
MP3-CD/ CD title and album number.
Erasing a program
You can erase the contents of the memory
by:
– opening the CD door;
– pressing STOP 9: twice during playback/
once in the stop position
– switching the set off or to TUNER
source.
Display: shows '
program is cancelled.
16
About Sleep
This set has a built-in sleep timer, which
enables the set to be automatically
switched off after a set period of time.
There are four sleep time options.
Setting and switching off Sleep
1 During MP3-CD/ CD or TUNER
playback, press SLEEP repeatedly to
activate and select your sleep time.
' briefly when the
2 To cancel sleep, press either:
– SLEEP repeatedly until
appears;
– POWER y.
The display shows in sequence
briefly and the sleep time options:
, ,
and .
Sleep
,