Setting Up A Connection For Wireless Synchronization - palmOne Tungsten E2 Getting Started

CHAPTER 11
Tip
®
To open HotSync
Manager on your
computer in step 2 of the
onscreen instructions (see
procedure step 3b,
below), click the HotSync
Manager icon on the
taskbar in the lower-right
corner of your computer
screen.
Tip
After the first time you set
up a connection and
wirelessly synchronize
with a computer, you can
synchronize with that
computer at any time by
choosing its device name
from the Service pick list
and tapping Connect.
Tungsten™ E2 Handheld
Making Wireless Connections

Setting up a connection for wireless synchronization

WINDOWS ONLY
0
1
Go to Favorites and select Bluetooth
2
Select Setup Devices, select PC Setup, select Bluetooth HotSync, and then
select Next.
3
Set up a connection for wireless synchronization:
a. Follow the onscreen instructions for steps 1–3, selecting Next after each step.
b. Select Launch HotSync Manager in step 4.
c. Select HotSync
Done
.
to synchronize your handheld with your computer.
88