Preparation For Use - Sylvania 6620LF Owner's Manual

PREPARATION FOR USE

CONNECTIONS
Cables used here are available on the market.
[ANTENNA CONNECTION]
VHF/UHF
RF Cable
OR
VHF
UHF
Flat twin-
VHF/UHF
lead Cable
Combiner
You can bracket this product as wall mounting TV using the arm adapted for 100mm (commer-
cially available).
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT AND FULLY INSERT.
MISE EN GARDE: POUR ÉVITER LES RISQUES D'ÉLECTROCUTION, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU'AU FOND.
Note:
•
For your safety and to avoid damages to the unit, unplug the antenna cable from the
ANT jack before moving the unit.
[EXTERNAL CONNECTION]
VIDEO1 INPUT
(OUT)
ex.
Audio Cable
(OUT)
Video Cable
Video Cassette
OR
(OUT)
Recorder
S-Video Cable
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for
●
connecting monaural audio equipment.
The S-VIDEO jack is given priority over the VIDEO jack.
●
VIDEO2 INPUT
ex.
(OUT)
Audio Cable
Video Camera
(OUT)
Component
Video Game
Video Cable
Note:
The TV can only accept a 480i (interlaced) video signal.
●
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by hit-
ting [INPUT SELECT] on the remote control. The input mode changes by hitting the button
as following:
INPUT
TV channel
SELECT
[CATV/SATELLITE CONNECTION]
*
CATV Box
or Satellite Box
OUT IN
75-ohm
Coaxial Cable
OR
AN T
RF Cable
*
Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
Rear of this TV
(IN)
(IN)
(IN)
(IN)
Rear of this TV
(IN)
VIDEO1 VIDEO2
INSTALLING THE BATTERIES
1 2
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
From Cable
• If the device is not to be used for a long period of time, remove the batteries to prevent
System
or Satellite damage or injury from possible battery leakage.
Antenna
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
From Cable
System TILT STAND
Tilt Stand
Adjust the stand to change the angle of TV (-5°~10°).
OPERATIONS
REMOTE CONTROL AND FRONT PANEL FUNCTION
POWER button
To turn TV on/off
X X Y Y
VOL(UME) /
To adjust volume
MENU button
To view on-screen menu
MUTE button
To mute sound
DISPLAY button
To display CH No./Audio Status
MENU VOLUME
Infrared Sensor Window
Note:
If some digits appear in the corner of the screen when the unit is turned on at the first time, hit
●
[POWER] without unplugging the power cord.
Install two AAA batteries (supplied)
3
matching the polarity indicated inside
battery compartment of the remote con-
trol.
INPUT
SELECT
INPUT SELECT button
To select TV or external input
POWER
o CH
buttons
m
p CH(ANNEL)
VOL n
1 2 3
Channel number buttons
4 5 6
To select channels
7 8 9
MENU 0 +100
SLEEP button
MUTE SLEEP CH RET
DISPLAY
CH(ANNEL) RET(URN) button
To return previous screen
CHANNEL SELECT
Power Indicator
5 10
K K / L L buttons
MENU button
To view on-screen menu
X X Y Y
VOLUME / buttons
To adjust volume
X X Y Y
CHANNEL / buttons
To select channels
SELECT button
POWER button
To turn TV on/off
POWER