Changing Your Computer's Video Resolution; Using The Dvd Player; Playing A Dvd; Playing An Audio Cd - Insignia NS-LTDVD26-09CA User Manual

08-1156 NS-LTDVD26-09CA - combined.fm Page 20 Tuesday, April 1, 2008 1:25 PM
Changing your computer's video
resolution
The following example shows Windows XP
settings. Even if you use a different Windows
operating system, the basic setup methods are
similar. For changing video resolution on a
Macintosh computer, refer to your Macintosh
documentation.
To change your computer's video resolution:
1 Click Start, Control Panel, then double-click
Display. The Display Properties dialog box
opens.
2 Click the Settings tab.
3 Change the screen resolution setting to a
supported resolution (the ideal resolution for
your TV is 1360 × 768).
4 Click OK, then click Yes to save your
changes.

Using the DVD player

Playing a DVD

To play a DVD:
1 Press POWER
2 Press INPUT, press
then press ENTER. You can also press DVD
on the remote control to select the DVD
mode. The DVD startup screen appears on
the screen.
Note
Playback starts automatically if a DVD is already
loaded
3 Insert a DVD into the disc slot, with the label
facing forward. The DVD player reads the
DVD and displays the opening menu.
4 Press / and
item, then press ENTER.
5 During playback:
• Press (Play/Pause) to pause
playback. Press it again to resume
playback.
• Press to fast-reverse, and press
to fast-forward.
• Press to skip to the previous
chapter, or press
chapter.
• To play in slow motion (forward or
reverse).
20

Playing an audio CD

Using DVD repeat play

to turn on your TV.
/
to select DVD,
/ to highlight a menu

Using CD repeat play

to skip to the next
www.insignia-products.com
Insignia NS-LTDVD26-09CA 26" LCD TV/DVD Combo
• To completely stop DVD playback, press
STOP twice.
6 Press to remove the DVD.
To play an audio CD:
1 Press POWER to turn on your TV.
2 Press INPUT, press
then press ENTER. You can also press DVD
on the remote control to select the DVD
mode. The DVD startup screen appears on
the screen.
Note
Playback starts automatically if a CD is already
loaded
3 Insert a CD into the disc slot, with the label
facing forward.
4 Press (Play/Pause). The tracks play in
numerical order.
5 Press STOP to stop playback, or press
(Play/Pause) to pause playback.
6 Press to remove the CD.
To select a specific track for playback:
• After you insert a CD and your TV finishes
reading the disc, press the number buttons to
enter the track number you want to play, then
press ENTER.
You can repeat chapters, titles, or the entire
DVD.
To use repeat play:
1 While the DVD is playing, press REPEAT to
select what you want to repeat. You can
select:
• CHAPTER (repeats the current chapter)
• TITLE (repeats the current title)
• ALL (repeats the entire DVD)
2 To stop repeat playback, do one of the
following:
• Press REPEAT until ALL disappears from
the screen.
• Press STOP twice.
• Eject the DVD.
You can repeat tracks or the entire CD using
repeat play.
To use repeat play:
1 While the CD is playing, press REPEAT to
select what you want to repeat. You can
select:
• ALL (repeats the current CD)
• TRACK (repeats the current track)
2 To stop repeat playback, do one of the
following:
/ to select DVD,