Table of Contents
Advertisement
Installation
Installing in Japanese-Made Cars
Installation on Toyota, Nissan or Mitsubishi Car using Brackets at Holes shown by "¶"
Accessory $ or %
Bracket
Screws (included in
audio unit package)
92 English
or
Accessory $ or %
Audio unit or others
Screws (included in
audio unit package)
Installation on Toyota Car using Brackets at Holes shown by "¶"
or
When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. If so, tighten
the bracket using accessories # as shown below.
1. Use accessories # at both sides as shown.
Accessory #
Audio unit or others
2. Mount the bracket at each side.
Accessory $
Bracket
Screws (included in
audio unit package)
3. Bend each end of accessory # to fix the bracket.
Use a flat-blade screwdriver or pliers, and
bend each accessory tab into the hole of
installation bracket to fix the bracket.
Accessory #
Accessory $
Screws (included in
audio unit package)
English 93
Advertisement
Table of Contents
