Optional Accessories; Preparation For Use; Safety Symbols And Terms - Omega Engineering 873C Operator's Manual

OPTIONAL ACCESSORIES
The following optional accessories can be used with the Models 873C
and 873F to enhance the performance of the instrument. These
accessories are available:
Part Number
KS871
SC800
880A2
MN1604
SMP-K-M
SMP-K-F
OT-201-1
Description
Tilt Stand/Belt Clip/Probe Holder; can
be used as a tilt stand or clipped to
your belt. It will hold one compact
probe.
Soft Carrying Case
Deluxe Carrying Case
9V Replacement Battery
Subminiature Thermocouple Connec-
tor, Male
Subminiature Thermocouple Connec-
tor, Female
1 oz jar of High Thermal Conductivity
Paste for fast surface measurements.
PREPARATION FOR USE
The Models 873F and 873C are supplied ready for use with battery
installed. Connect the appropriate probe to the miniature TC connec-
tor located on the top of the instrument (just above the display).
SAFETY SYMBOLS A N D TERMS
The symbol / ! \ on the instrument denotes that the user should refer
to the opjerating instructions.
The WARNING used in this manual explains dangers that could result
in personal injury or death.
The CAUTION used in this manual explains hazards that could
damage the instrument.