I Extra Picture Settings - Samsung SP42W4 Owner's Instructions Manual

ENG
➛ ➛
Mode
Adjust
Scan mode
Digital NR
Blue screen
LNA
➛ ➛
Mode
Adjust
Scan mode
Digital NR
Blue screen
LNA
➛ ➛
Mode
Adjust
Scan mode
Digital NR
Blue screen
LNA
➛ ➛
Mode
Adjust
Scan mode
Digital NR
Blue screen
LNA
Extra Picture Settings
Picture
❿ ❿
Dynamic
❿ ❿
: Natural
: Off
: Off
: Off
Picture
❿ ❿
Dynamic
❿ ❿
: Natural
: On
: Off
: Off
Picture
❿ ❿
Dynamic
❿ ❿
: Natural
: Off
: On
: Off
Picture
❿ ❿
Dynamic
❿ ❿
: Natural
: Off
: Off
: On
28
N Scan mode
You will normally find that scan mode is best set to Natural
to reduce any slight picture flicker. However, it is possible that
some occasional broadcasts (NTSC-M) may benefit by
changing the scan mode. Auto, Natural, Digital and
Progressive modes are available.
N Digital NR
If the signal received by your television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
N Blue screen
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set
the Blue screen mode to Off.
N LNA
This feature is very useful in the situation that the TV is used
in a weak signal and amplifies the TV signal in the weak
signal area, but not noise.
This feature is working only in a weak signal condition, and
that is memorized on current channel, additional.
1
Press the MENU button.
Result: The options available in the Picture group are
displayed.
2
Press the button.
3
Select the required option (Scan mode, Digital NR, Blue screen
or LNA) by pressing the M or L button.
Press the ➛ or ❿ button to change the setting.
4
N Scan mode : Auto, Natural, Digital, Progressive
N Digital NR : Off or On (activating)
N Blue screen : Off or On (activating)
N LNA : Off or On (activating)