19. Take these 4 screws...
21. Set the correct torque.
23. Replace the QWERTY COVER, beginning on the left side,
where the connectors are located.
Page
29
(5)
Download free service manual at http://ponsel1.blogspot.com
20. ...and place them into their recesses.
22. Apply the torque to these screws in the order shown.
24. Close the clips, check that no cables will be squeezed,
otherwise the DUAL AXIS HINGE MODULE becomes unusable.
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
E90 RA-6
Service Manual Level &2
ISSUE