7. Pull up the FLASH GASKET.
9. Gently push it down. The clips of the housing are released
now.
11. Unscrew these 5 TORX PLUS size 4 screws in the order
shown.
Page
2
(5)
Download free service manual at http://ponsel1.blogspot.com
8. Insert the SS-81 into the housing of the CAMERA MODULE. Note
the correct positioning of the tool.
10. Lift out the CAMERA MODULE now.
12. Discard the screws. Do not use them again when
reassembling.
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
E90 RA-6
Service Manual Level &2
ISSUE