Motorola Timeport P8767 Owner's Manual page 105

System Mode Settings
Standard Mode:
Your phone first seeks a home type
system, then a non-home type system.
Home Only Mode:
Phone will not operate outside its
home system.
Scan A Mode:*
Phone will operate only within non-
wireline (B) systems.
Scan B Mode:*
Phone will operate only within
wireline (B) systems.
Analog Only Mode:*
Phone will operate only on analog net-
works. Some peripheral devices
require analog signals.
*
Analog Only
Turning Analog Only ON tells your phone to seek an analog
channel for the next call. If you do not place a call, your
phone will revert to regular service after a few minutes.
Note: Some peripheral devices, like fax machines and modems,
require analog operation.
4. Find Press
Feature
5. Toggle Press
Feature
6. Exit Press
Menu scroll to other features.
* Network and service dependent feature. Not available in all areas.
q q q q Z Z Z Z
or to scroll to Analog Only .
A A A A
to toggle the feature ON or OFF.
º
to exit the menu, or you may
Shortcut:*
ƒ
Press then
¤
any time to
seek an analog
network for
one call.
105