Display Dtmf Digits - Aastra 6757i CT User Manual

Display DTMF Digits

A feature on the 6757i CT phone allows users to enable or disable DTMF (dual-tone
multi-frequency) digits to display to the IP phone when using the keypad to dial, or when dialing
from a softkey or expansion module key.
DTMF is the signal sent from the phone to the network that you generate when you press the
phone's touch keys. This is also known as "touchtone" dialing. Each key you press on your phone
generates two tones of specific frequencies. One tone is generated from a high-frequency group of
tones and the other from a low frequency group.
If you enable the Display DTMF Digits parameter, the digits you are dialing from the keypad or
from a softkey, display to the IP phone's LCD display. This parameter is disabled by default (no
digits display when dialing).
You can enable the "Display DTMF Digits" parameter using the Aastra Web UI.
Configuring Display of DTMF Digits
Aastra Web UI
Use the following procedure to configure the display of DTMF digits on the IP phone.
Note:
"Display DTMF Digits" is disabled by default.
1. Click on Basic Settings->Preferences->General.
Model 6757i CT IP Phone User Guide 243