Using Intercom - Aastra 6757i CT User Manual

Using Intercom

On the 6757i CT, you can use the Icom key to automatically connect with a remote extension.
By default, the Intercom key is configured as Key 4 on the top set of softkeys.
Using the Icom Key
1. Press the Icom key.
2. Enter the extension number of the person you wish to intercom or the BLF key for that
extension.
3. After a beep tone, your phone automatically connects with the remote extension and you can
speak through its speaker.
4. To cancel intercom, press
5. When you are finished speaking, hang up the phone by placing the handset back on-hook or
by pressing
up, the remote phone also hangs up.
You can set specific incoming Intercom call features on the 6757i CT IP phone using the Aastra
Web UI. The following table describes these features.
Incoming Intercom Features
in Aastra Web UI
Microphone Mute
Auto Answer
154
IP Phone UI
or the line/call appearance button for the active call. When you hang
Description
Allows you to enable or disable the microphone on the IP phone for
Intercom calls made by the originating caller.
Allows you to enable or disable the IP phone to automatically
answer an Intercom call. If auto-answer is enabled on the IP phone,
the phone plays a tone (if "Play Warning Tone" is enabled) to alert
the user before answering the intercom call. If auto-answer is
disabled, the phone rejects the incoming intercom call and sends a
busy signal to the caller.
or the Cancel key.
Model 6757i CT IP Phone User Guide
Intercom
Key