Mitsubishi Electric PRH-P8MYA Technical & Service Manual page 11

[Display]
A
Current time/Timer
C
Centralized control
D
Abnormality control
E
Operation mode:
FAN, HEAT
F
Preparing for Heating mode
G
Defrost mode
H
Set temperature
I
Power ON
J
Louver
Caution:
• Only the Power display lights when the unit is stopped and power supplied to the unit.
• When power is turned ON for the first time the (CENTRAL CTRL) display appears to go off momentarily but this is not
a malfunction.
• When the central control remote control unit, which is sold separately, is used the ON-OFF button, operation switch
button and TEMP. adjustment button do not operate.
• "NOT AVAILABLE" is displayed when the Airflow direction button or Louver button are pressed. This indicates that
this room unit is not equipped with the fan direction adjustment function and the louver function.
• When power is turned ON for the first time, it is normal that "H0" is displayed on the room temperature indication (For
max. 2 minutes). Please wait until this "H0" indication disappear then start the operation.
D C
CENTRALLY CONTROLLED
E
CHECK
F
STAND BY
DEFROST
TEMP.
G H
COOL, AUTO,
B A U T Q S
1Hr.
ON OFF
ßC
CLOCK
FILTER
CHECK MODE
ßC
TEST RUN
ERROR CODE
FUNCTION
NOT AVAILABLE
ON/OFF
I K L J
K
L
M
N
O
P
Q
R
S
T
U
- 8 -
R
P
O
N
M
Not available function
Ventilation
Function setting mode
Test run mode
Error check mode
Filter sign
Set effective for 1 hr.
Sensor position
Room temperature
Airflow
Fan speed