Panasonic ER‑GB50 Operating Instructions Manual page 5

Cuttingyourhair
1.Cuthairtothecorrectheightbymovingthetrimmer
backagainsttheflowofthehair.
• Do not use the trimmer in an inverted position. This can cut
hair too deeply.
Cuttingaroundtheears
Cut a little, and then gently
separate the trimmer from the
hair.
Cuttingthenapeoftheneck
Bring the trimmer gently
away from the hair to
finish.
Do not use the trimmer in an inverted position.
This can cut hair too deeply.
► Trimmingwithoutattachmentcombs
Trimming your beard without an attachment will trim beard length
to approx. 0.5 mm.
Cleaning
Cleaningwithbrush
1.Disconnectthepowercordfrom
thetrimmer.
• Be sure to set the switch to "0"
before you remove the blade.
2.Removethecombattachment.
3.Holdthemainbody,placeyour
thumbagainstthebladesand
thenpushthemawayfromthe
mainbody.
4.Brushoffanyhairtrimmings
fromthemainbodyandfrom
aroundtheblade.
5.Brushanyhairtrimmingsout
frombetweenthestationary
bladeandthemovingblade
whilepressingdownthe
cleaninglevertoraisethe
movingblade.
Cleaninginwater
The mark on the left means suitable for cleaning under
an open water tap.
5