Using Your Tv - Insignia NS-15LCD User Manual

NS-15LCD 15-inch TV - combined.fm Page 14 Wednesday, March 29, 2006 5:16 PM
Note Batteries should never be thrown away or incinerated. Always
dispose of batteries in accordance with your local regulations
concerning chemical wastes.

Using your TV

Basic operation
To watch TV:
1 Plug the AC power adapter into a standard AC power outlet.
2 Plug the AC power adapter cord into the power connector on the
TV.
3 Press POWER to turn on the TV. The power indicator light on the
TV turns from red to green.
4 Press CH
- OR -
Press the number buttons to enter the channel number directly.
5 Press VOL
6 Press MUTE to instantly mute the sound. Press it again to restore
the previous volume level.
7 Press DISPLAY to show the current channel number on the
screen.
8 Press AUDIO on the remote to access the sound mode settings,
then press AUDIO repeatedly to select the setting you want from:
• Standard
• Memory
• News
• Music
These settings are also available in the Sound submenu.
9 Press PICTURE on the remote to access the picture mode
settings, then press PICTURE repeatedly to select the setting you
want from:
• Standard
• Memory
• Soft
• Dynamic
These settings are also available in the Picture submenu.
10 Press RECALL to go to the previous channel.
11 Press POWER again to turn off the TV.
Note In TV, AV, S-Video, or Component mode, the TV goes into Standby
mode after five minutes if there is no signal and no input. In VGA
mode, the TV goes into Standby mode in 45 seconds.
14
or to change the channel.
or to adjust the volume to the level you want.
www.insignia-products.com
NS-15LCD 15" LCD TV