DCR-PC103E/PC104E/PC105/PC105E
2-23. EXTERNAL CONNECTOR (HOT SHOE)
(PC105/PC105E)
2 External connector (hot shoe),
4 Mic unit
5 Stroboscope
section, ST frame
assembly
3 Special tapping
screw
(M1.7 × 5.5)
Caution
When installing the Mic unit, align and insert the rubber
protrusions of the Mic unit into the hole of the FK frame
assembly so that the Mic unit made of rubber should
not be deformed.
FP-671 flexible board
1 Two screws
(M1.7 × 2.5),
lock ace, p2 (black)
Rubber protrusions
of the Mic unit
NG
Hole of the
FK frame
assembly
7 External connector
(hot shoe)
6 FP-671 flexible board
5 ST frame
assembly
3 Special tapping
screw
(M1.7 × 5.5)
2-18
(PC103E/PC104E)
7 External connector
(hot shoe)
6 FP-671 flexible board
2 External connector (hot shoe),
FP-671 flexible board
4 Mic unit
1 Two screws
(M1.7 × 2.5),
lock ace, p2
(black)