Cabinet (Front) Assembly; Cabinet (G) Assembly - Sony DCR-PC103E Service Manual

2-2. CABINET (FRONT) ASSEMBLY

Caution
When attaching the cabinet
(front) assembly, be careful
not to damage the claw.
7 Cabinet (front) assembly
Screw
5
(M1.7 × 2.5),
lock ace, p2
Screw
3
(M1.7 × 2.5),
lock ace, p2

2-3. CABINET (G) ASSEMBLY

5 Float the cabinet (G) assembly
and remove the eject knob
from the hole of the Cabinet
(G) assembly.
Eject knob
4 Open the cassette lid.
4 Open the cassette lid.
6 Two Claws
2 Open the jack cover
Three screws
1
(M1.7 × 2.5),
lock ace, p2
Caution
Be careful not to drop the eject knob.
DCR-PC103E/PC104E/PC105/PC105E
Screw (M1.7 × 4),
1
lock ace, p2 (black)
6 Remove the cabinet (G) assembly
in the direction of the arrow A .
Two screws
2
(M1.7 × 2.5),
lock ace, p2
8 Eject knob
7 Claw
2-3
Caution
When installing the cabinet
(front) assembly, install it while
pushing the flexible boards
(from the lens device and the
NS-018 board) in the direction
of the arrow.
Flexible board
(from the NS-018 board)
Flexible board
(from the lens device)
3 Open the jack
cover (HP)
A