Ryobi RCP254G Operator's Manual page 7

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
50' 15 m
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
DANGER:
WARNING:
CAUTION:
CAUTION:
Precautions that involve your safety.
Read and understand all instructions before operating the product, follow all warnings and
safety instructions.
Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.
Wear eye protection which is marked to comply with BS EN166 or Australian and New Zealand
Standards, as well as hearing protection, when operating this equipment.
Keep all bystanders at least 15m. away.
Keep feet and hands away from rotating tines.
Use unleaded petrol intended for motor vehicle use with an octane rating of 91 [(R + M) / 2]
or higher. This product is powered by a 2-stroke engine and requires pre-mixing of petrol and
2-stroke lubricant.
Use synthetic 2-stroke oil for 2-stroke engines.
Mix the fuel mix thoroughly and also each time before refuelling.
SIGNAL
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SAVE THESE INSTRUCTIONS
SYMBOLS
EXPLANATION
7
MEANING