Sharp AL-1000 Service Manual page 31

B. Manual multi paper feed operation
1. Before paper feed operation, the manual paper feed
solenoid (MPFS) is turned OFF as shown in the figure
below.
OF F
MPFS
2. When the PRINT button is pressed, the manual paper feed
solenoid (MPFS) turns on to disengage the manual paper
feed latch A from the manual paper feed clutch sleeve A,
rotating the manual paper feed roller and the manual take-
up roller. At the same time, the manual paper feed stopper
opens and the manual take-up roller is pressed to the sur-
face of the paper to start paper feeding.
ON
MPFS
A
C
C
A
3. When pawl C of the manual paper feed clutch sleeve is
hung on the manual feed latch, the manual feed stopper
falls and the manual take-up roller rises. At that time, the
manual paper feed roller is rotating.
ON
MPFS
4. The lead edge of the transported paper is pressed on the
resist roller by the transport roller. Then the paper is
stopped temporarily to make synchronization with the lead
edge of the image on the OPC drum.
The operations hereinafter are the same as the paper feed
operations from the tray. (Refer to A-5 ∼ 8.)
7-7
AL-1000/1010
A
C